Ebara 2GPE Matrix E-SPD+

Ebara 2GPE Matrix E-SPD+

Cold Water Booster Set

Ebara 2GPE Matrix E-SPD+
Tech specs
  • Voltage Supply230V~1ph~50hz or 400V~3ph~50hz
  • ProtectionIP55
  • Motor Size0.45 kW > 4.0 kW
  • Maximum Flow7.5 litres/sec (per pump)
  • Maximum PressureUp to 9.0 Bar
  • Warranty2 years

About the Product

The Ebara 2GPE Matrix E-SPD+ range is an ideal solution for boosting water supply on large domestic and commercial applications, covering flows from 0.5 litres / sec up to 15.0 litres / sec with pressures up to 9.0 bar and is available for either a 1ph or 3ph power supply.

Ebara 2GPE Matrix E-SPD+ Features

  • Twin pump variable speed booster set for large domestic and commercial applications
  • Flow range from 0.5 litres / sec up to 15.0 litres / sec with pressures up to 9.0 bar
  • WRAS approved Ebara Matrix stainless steel horizontal centrifugal multi-stage pumps
  • Fully packaged booster sets supplied assembled, tested and preprogrammed

The Ebara E-SPD+ motor mounted variable speed drive controls the operation of the pump via a pressure transducer wired to each drive, eliminating the possibility of the risk caused by any signal point of failure. The Ebara E-SPD+ drive has 2 RS485 ports for communication and operation of up to 8 pumps.

The innovative LCD display gives an easy overview of the system status and of the operating parameters and for keeping track of the history of the key parameters, faults and alarms.

Safety Functions:

  • Connections for float switch or flow switch
  • 2 pairs of programmable volt free contact outputs
  • System protections against excess current, input voltage fluctuations and dry running.
E-SPD+ controller

Contact Us